-
Coffee Beans
All Coffee Beans
Shop by roastery countryShop by originRoasteries787 Beans90sAlarbaArriyadhAsanteAshBarbaricBaristroBeyond GravityBeyond the NoiseBlack HorseBlack KnightBlack SipBones CoffeeCafeterosCamel StepChimneyCodaCofftailDapilioDripperEXFactoryFermentation LabForty Road RoasteryGraphHasilHermanosHQKate&KimKiffaLepressoMotmotMoveupMUMTDMVSMNanaOLALAOYW CoffeePiccoloSofeSoilSouthThe Coffee LabThe RoasteryVulcanZelebrity
21 products
Sort by:
21 products
A bottomless portafilter for 51 mm espresso machines. The base is fully open, so the extraction is visible as it happens: when it starts, where it comes from, and where water escapes round the side of the puck instead of...
A flat coffee scale with a smooth black top and a non-slip platform. Its display puts the timer and the weight on one line: the elapsed time as 0'00" on the left, the weight in grams on the right, with...
The smallest of Timemore's Basic scales: a palm-sized plate thin enough to go in a bag and to sit under a cup on an espresso machine drip tray. An IPX3 rating means splashes and cleaning water are not a problem....
An electronic coffee scale that reads in 0.1 g steps up to 2 kg, with a minimum detection weight of 0.5 g. The low flat body takes a server or a dripper on the counter and still slides under the...
The third generation of Timemore's Basic scale: a 140 × 120 × 20 mm chassis weighing 300 g, thinner and lighter than the one before it, with IPX3 water resistance for splashes on a bar. It reads from 0.2 g...
Cafetto Espresso Clean tablets backflush a portafilter espresso machine. One tablet in a blind filter lifts coffee oils, grounds and staining out of the group and the solenoid, and leaves no odour behind after rinsing. The jar holds 150 tablets,...
The 02 size of the V60 cone dripper in white porcelain, for one to four cups — Hario counts a cup as 120 mL. It is 140 × 120 × 102 mm with a 116 mm mouth and weighs about...
A 710 ml glass server that ORIGAMI developed with HARIO on the basis of one of HARIO's own server shapes, finished with a glass handle so the body reads as a single piece. The widened lower half is a form...
A small electric cleaner for the portafilter basket: press the portafilter down onto the triangular spiral scraper blade and it turns to lift spent grounds and coffee oils out of the basket, with a brush standing in the well beside...
A mains countertop grinder with a 165 W motor and 40 mm conical burrs. The bean hopper holds 275 g and the grounds chamber 99 g; it measures 182 × 124 × 318 mm and comes on a UK 3-pin...
A bottomless portafilter for 58 mm espresso machines, the common professional size. With the base open, nothing hides the shot: you see where extraction starts and where water escapes at the edge of the puck. The body is stainless steel...
A coffee scale accurate to ±0.1 g with a clear tray that lifts off the platform and washes on its own. The body is 100×100×23 mm in ABS and PC with a glass top, and the display carries the weight...
A WDT tool that breaks up clumps in the ground coffee inside the portafilter basket before tamping. Stainless steel needles sit in a rotating head, and the aluminium alloy base rests on the portafilter so the needles reach the same...
A spring-loaded tamper that applies the same force every time. The aluminium base is 58.5 mm across with a rippled face that leaves concentric rings in the puck, the barrel is knurled for grip, and the handle is natural wood....
A 350 ml stainless steel milk pitcher, matte black outside and bare steel inside. The spout is narrow and pointed, and that is what gives control over the stream when pouring latte art. Two marks are etched on the inner...
A SUS304 stainless mesh disc that sits on the tamped coffee inside a 51 mm basket before the portafilter goes in. The mesh spreads the water coming down from the group across the whole surface instead of letting it land...
A SUS304 stainless mesh disc that sits on the tamped coffee inside a 58 mm portafilter basket. It takes the water coming down from the group and spreads it over the whole bed instead of letting it strike one point....
A mirror that sits under a bottomless portafilter so the shot can be watched as it falls. The disc is polished SUS 304 stainless steel on a ball joint over a magnetic base that grips the machine body or the...
A tamping base that gathers the espresso corner into one piece. At the front a fork holds the portafilter level, with a thumbscrew that sets the grip, so it stays put while you tamp instead of sliding on the counter....
A dosing cup with the scale built into its wall: stand it under the grinder and it weighs the grounds as they fall, so there is no second scale and no second transfer. Precision is 0.1 g up to a...
A stainless steel espresso machine with a 19-bar pump and a 2.8 L water tank, topped by a 200 g bean hopper and a 110 W conical grinder that grinds straight into the portafilter. The hopper collar is marked from...
